About this Document
This document is the installation and end user manual for EP1plus Module.
Updates: For the latest version, please visit: childcheckmate.com/installep1plus Mobile: This document is available on your phone, tablet or PC. Download: You can also download the document as a PDF. Print: For best results, print the PDF double-sided with two sheets per page.
Installation & User Manual EP1plus
Last Modified: {{date:MMMM d, yyyy}}
Installation 6-Pin Wire Harness
EP1plus Installation & User Manual Overview This document provides links to the installation manuals for each of the Wire Harnesses needed to complete an EP1plus installation. Pinouts Installation For installation instructions, please click on the links below. Mounting of the EP1plus Module Locate a convenient mounting area for the EP1plus Module within the main electrical panel at the front of the vehicle. Before securing the unit, check to ensure that its location is central enough so that all the required Harnesses are able to reach the EP1plus. Secure the unit to the electrical panel using the double-sided tape provided. Screws may also be used to further secure the unit. Insert Harnesses into their respective ports, ensuring that the colored dots match up before inserting the Harness into the System. Tech Tip: Create a ‘loop’ in the attached wire Harnesses so that water does not flow into the Main Alarm Unit. Activating the Child Check-Mate System® Turn the ignition 'ON'. The System will make quick beeping tones for 2 seconds. This indicates that the System has power. Wait 12 Seconds and then trigger the activation wire. Activate the System by using the Input where the Brown Wire (6-PH Wire #5) is tied in. The System will generate 2 long tones indicating that the System has been activated. Turn ignition 'OFF'. The System Alarm (a high-pitched beeping) will begin to sound. If connected, the interior lights will illuminate. Wait 8 seconds. The EP1plus will change frequency of tones. The vehicle Horn will begin to pulse 'ON' and 'OFF'. Tech Tip: This step is to confirm that the Horn is properly connected. The Horn does not need to sound during regular operation. Turn ignition 'ON'. All alarms will be silenced. The system will beep every 30 seconds until timeout, as a reminder to perform your child search. If connected, the interior lights will remain illuminated. Depress the Reset Button for 2-3 seconds. The System will emit a confirmation tone. If connected, the interior lights will remain illuminated for 120 seconds (default) or the specified time as per the specified program. Turn ignition 'OFF' and keys can be now be safely removed.
Installation RVT (Deactivation Button)
Installation Upgrade Dome Light Harness
Pinout EP1plus Module
Installation 3-Pin Wire Harness
Popular Links & Next Steps
Installation: Upgrade Dome Light Harness
Installation: 3-Pin Wire Harness
Text
Installation: RVT (Deactivation Button)
Installation: 6-Pin Wire Harness
+1-613-835-2489 +1-877-494-8222
www.childcheckmate.com
Contact Us
Online Store
Technical Support technicalsupport@childcheckmate.com Sales SALES@childcheckmate.com
Support Forum
Child Check-Mate System, Inc. P.O. Box 70 Navan, ON Canada K4B 1J3